Solve your compressed air supply problems by installing a paintball compressor and get an unlimited supply of paintball compressed gas refills.
Equipment Needed to Make Compressed Air for Paintballing
A typical setup for making compressed air for paintball guns consists of a high-pressure paintball compressor, one or more storage tanks, and a fill station with two or more fill lines.
The compressor takes in outside air and compresses it to about 310 bar / 4500 psi, which is a very high pressure. This means that all equipment used (e.g. pipelines, storage cylinders, etc.) must be rated for this high pressure.
This air compressor is designed for use with PCP airguns, paintball tanks and other pneumatic airguns. The compressor is rated at 4500 psi and has a fully adjustable cutoff switch.
The compressor is portable and can be used at home through a standard wall outlet or in the field through a 12-volt car battery.
It is so quiet you can barely hear it running in the same room. There is no need for oil or water as the pump generates little to no heat.
PCP Air Compressor , fast filling speed, suitable for filling large capacity tanks. Working pressure 300bar/4500psi/30mpa, it is a water-cooled compressor with two-stage compression design, which requires the use of water and oil, and can be used for diving, hunting, firefighting, and paintballing.
Related Information
No.6 industrial Park, Wanzitou Village, Pingchao Town, Tongzhou District, Nantong City, Jiangsu Province
E-mail:
Tel.:
+86 15262868567
WhatsApp：
